Masima 1859 LNCS Adtx SpO2 Sensor
Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensors Medical Equipment
► Brief Description
Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensors is a product for SpO2 detection for patients, suitable for adult patients weighing >30kg. It is forbidden to use inappropriate SpO2 sensors for inappropriate patient groups, otherwise it will cause inaccurate results and even affect patients. The main method of use of the Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensor is to clamp it on the patient's finger for measurement, and the preferred position is the middle finger or ring finger that the patient does not often use. The main function of Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensors is to measure the patient's arterial hemoglobin functional oxygen saturation (SpO2) and pulse rate (measured by the SpO2 sensor) for continuous non-invasive monitoring. The Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensor is a very practical device in the medical environment. It can be used in hospitals, medical places, mobile environments, and even in home environments, and meets the requirements of clinical medicine.
► Specification
| Product Category | SpO2 |
| Product Type | Sensor |
| Total Length | 18 in |
| Applicable Site | Fingers |
| Recommended Weight | >30Kg |
| REF | 1859 |
► Parameters
| Preconditioning Parameters |
| Temperature | 54°C |
| Relative Humidity | 40% |
| Vacuum Set Point | 1.3 psia |
| Preconditioning Time | 30 minutes |
| Sterilization Parameters |
| Temperature | 54°C |
| Relative Humidity | 40% |
| EO Concentration | 600-750 mg/L |
► Caution
Before using the Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensors, please be sure to read the instructions or the operation manual carefully. It needs to be professionally disinfected by professional medical personnel before it can be used on patients. But disinfection does not mean that it can be soaked in any solution, otherwise the sensor may be damaged; and it cannot be sterilized by radiation, steam, high pressure or ethylene oxide. If sterile packaging is used, only Food and Drug Administration (FDA) approved sterile packaging may be used.Therefore, please refer to the user manual or instruction manual when using it, otherwise it will affect the use of the sensor, affect the accuracy of the readings, and even cause some serious accidents.
► Detailed photos
Thank you for your time. If you are interested in our company or our Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensors, or have any suggestions for us, please feel free to contact us. We will reply you within 12 hours. Wish you a happy life.
Product Tags:
|
|
Masima 1859 LNCS Adtx Adult SpO2 Adhesive Sensors 1.8in Single Patient Medical Accessories Images
|
